How to maintain your smart TV product in this hot summer?

In the summer of 2016, how can we maintain our smart TV products in this hot summer? Xiaobian brings three kinds of smart TV maintenance methods to help users easily extend the life of smart TV!

The summer of 2016 has only just begun. Heavy rains have hit across the country. During the rainy season, thunder and lightning are frequent, and the weather is humid. Weather TV here is easily affected and problems arise. In addition to heavy rain, wet weather and dust can have a serious impact on television and can even damage your health.

How to maintain TV

Thunder has come to how to maintain the TV

Thunder is not watching TV is the common sense that everyone knew since childhood. Why is this?

Watching TV during thunder, usually at the moment of lightning, TV images are very unstable, but currently many homes use digital TV, and generally no machine damage will occur. When watching thunder, it is usually indoors to watch TV. The interference on the screen and in the sound is mostly the radiant energy of lightning. In principle, this radiant energy will not damage the TV.

However, if the cable ages, or the insulation skin damages, causing the metal wire to be exposed, the consequences of lightning strikes are disastrous. For users setting up outdoor antennas, be sure to choose a location far away from the power line, especially away from the high-voltage lines. Therefore, in thunderstorms, it is best to unplug the TV and watch TV as little as possible.

How to maintain TV in wet weather

Wet weather TV needs better maintenance

The most common problem with damp televisions is that images are displayed for a long time after power on, or that there are snowflakes, or there are no sounds, or neither. The dampness of the TV not only affects the viewing but also may cause short circuit and burn the parts. How can we maintain television in wet weather? Several methods teach you to easily maintain.

1, correctly placed

Don't put the TV under the window sill to prevent the window sill from leaking due to rain; do not place fish tanks, vases or other wet objects near the TV.

2, it is best to start once a day

When the weather is wet, the easiest way to maintain the TV is to turn it on for 3 to 4 hours a day. The heat generated by the TV can defuse the moisture in the air or put the TV into standby mode. At this time, the parts in working condition will dissipate heat. Dispel the body's moisture. When unattended at home, it is best to unplug, close the windows, and cover the TV set.

3, using a hair dryer to blow away moisture

When it is found that the TV is damp, the hair dryer can be properly used to move the small holes in the back of the TV to move up and down and left and right, blowing the dust and moisture inside the TV.

How to prevent and remove dust

Be careful of dust damage your TV!

Due to the small holes in the back cover of some TVs, dust will enter the interior of TVs through these holes for a long time, and dust will fall on the TVs, which will have a great impact on health.

Research shows that dust is an important carrier of electromagnetic radiation. After the television is turned off, electromagnetic radiation still remains in the dust. Electromagnetic radiation acts on people. It also produces electromagnetic induction, and it also has part of energy deposition. It eventually leads to human cell function and Abnormal state of cells, changes in the electrical conduction of nerve cells, disturbing normal physiological activities of humans, over time can also cause neurasthenia and neurological disorders.

In addition, when the weather is wet, the water vapour will condense with the dust, which will cause the TV to “crash and creep”. The dust will also overload the electronic components, circuit boards and radiators. As a result, the power consumption increases and even the electronic components are burned out, causing a fire.

How to prevent and remove dust?

Prevent dust from covering the back of the TV with a soft cloth, but most of cool TVs are ultra-thin, so you can buy a dust film to stick behind the TV.

How do TVs get into dust? To completely remove dust, use the following methods:

1. Add a small amount of softener in clean water and mix well (the ratio of softener to water is approximately 1:500). Place the towel in a softener solution and soak for 3 minutes. (Or use a special TV cleaning nowadays)

2. Unplug the TV. Twist the towel and place it on the heat vent of the TV. Note that all the vents on the TV should be covered with a towel.

3. Lift a corner of the towel, use a hair dryer to blow the air into the TV, and then blow it in from another vent. Because the softener has cations, it has a positive charge, the dust has an anion, and it has a negative charge.

After the dust in the TV is blown up, it will be adsorbed on the wet towel that is blocked by the heat vent. The purpose of dust removal is achieved.