This mouse was bought by me 2 years ago and I have been fighting twice for such a long time. The first time I was in use for about 1 year, the keys didn't respond at all and then I fell a few times and lived and I didn't send them for sale. This time it was a few days ago that the left button was not sensitive and it couldn't stand it. However, it had no money, so we could only open it up.
I believe we can also experience this phenomenon. Many people on the Internet are talking about fretting. However, if you want to change micro motions, you can, but my electric iron is always broken, so it's easy to disassemble. Clean up, if it succeeds
The following is a brief description of the dismantling process, the demolition of the mouse is very simple, press the button on the foot pad, you will find the screw hole, the screw removed slowly open, shaking and separating along the buckle slowly on it, Open the gap after opening, touch every day is certainly not clean.
The black square with white dots is the micro-motion. The method I use is to use a cotton swab to dip a bit of alcohol, then squeeze in some small white pieces, and press a button. This method used to fix the buzzing button. It's so good, it doesn't hurt the buttons.
I just stuck a layer of tape
Finally, in accordance with the order of removal and then re-installed, screwed a good screw, sticky mats, tried it, it really worked. However, we must pay attention to it. Sticky tape should not be greedy. If it is sticky, it will affect the hand. If it is thin, it will not stick again. Try it slowly. Of course it's better to change fretting, but some minor problems are not necessarily fretting things. Many times the keys are worn for a long time, so you can save the province, try a simple method first, and then no longer move the knife. In addition, there is a risk of dismantling, try not to make a miracle, after all, plastic is still fragile.
Thank you for watching. If there are any mistakes, please point out that I am in a timely manner and I wish everyone a happy Mid-Autumn Festival!
Thermal Relay is used to protect AC three-phase asynchronous motor/electric motor against overload and open phase. Korlen electrical appliances produce thermal relay switch in wholesale,being a good thermal overload relay suppliers from china. We also offers Manual Motor Startor , AC Contactor, led light, Circuit Breaker etc.
Thermal Relay,Latching Relay,Reed Relay,Polarized Relay
Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.korlen-electric.com