Infineon and Nokia will jointly develop 4G technology
Chip maker Infineon announced that it has partnered with Nokia to manufacture chips for next-generation mobile networks, making it another step forward in supplying chips to Nokia's high-end mobile phones.
Infineon said on Wednesday that the collaboration aims to make Nokia ’s current and future modem technology compatible with Infineon ’s transponder chips. Infineon has now supplied chips to Nokia.
Infineon said that this cooperation is to produce products for the fourth generation of LTE technology. This is the next step in the mobile network. The fourth-generation technology will enable wireless high-speed Internet connections. The first such network is expected to be launched in 2011.
The mobile industry has not determined a 4G network standard. Some operators and developers support Sprint Nextel's WiMax technology, while others advocate the use of LTE systems.
Canada ’s Nortel Network has previously said that for 80% of the world ’s existing mobile phone providers, LTE is the most likely upgrade path.
The D-subminiature or D-sub is a common type of electrical connector. They are named for their characteristic D-shaped metal shield. When they were introduced, D-subs were among the smallest connectors used on computer systems.
A D-sub contains two or more parallel rows of pins or sockets usually surrounded by a D-shaped metal shield that provides mechanical support, ensures correct orientation, and may screen against electromagnetic interference. The part containing pin contacts is called the male connector or plug, while that containing socket contacts is called the female connector or socket. The socket's shield fits tightly inside the plug's shield. Panel mounted connectors usually have threaded nuts that accept screws on the cable end connector cover that are used for locking the connectors together and offering mechanical strain relief. Occasionally the nuts may be found on a cable end connector if it is expected to connect to another cable end. When screened cables are used, the shields are connected to the overall screens of the cables. This creates an electrically continuous screen covering the whole cable and connector system.
ANTENK offers one of the most comprehensive lines of high reliability D-Subminiature connectors available for military, avionics, space and high reliability industrial applications.
Features of ANTENK D-Subminiature Connectors
- Standard Density d-subminiature connectors
- High density d-subminiature connectors, contacts are available as well as several custom and combination versions.
- All d-subminiature connectors may be manufactured with crimp, solder cup, straight PCB and right angle PCB terminations (except solder cup terminations on High Density configurations).
Ragne of of ANTENK D-Subminiature Connectors
Standard Density solder cup, stamped & formed contact D-subminiature connectors
High Density solder cup , stamped & formed contact D-subminiature connectorsStandard Density solder cup, machined contacts D-subminiature connectors
High Density solder cup,machined contacts D-subminiature connectors
crimp & load D-subminiature connectors
IDC D-subminiature connectors
Standard Density vertical mount D-subminiature connectors
High Density vertical mount D-subminiature connectors
Standard Density right angle D-subminiature connectors
High Density right angle D-subminiature connectors
surface mount D-subminiature connectors
Slim D-sub series
D-subminiature connectors stacked D-sub series
D-Subminiature Connectors Series
Standard Density solder cup, stamped & formed contact,High Density solder cup, stamped & formed contact,Standard Density solder cup,machined contacts,High Density vertical mount,Standard Density right angle,High Density right angle
ShenZhen Antenk Electronics Co,Ltd , https://www.antenk.com