Cement free calcium oxide meter operation steps - Database & Sql Blog Articles

Probe domestic high current needle with 150mm head diameter, 3.0 thread needle, and high current needle in total

MOS power IC full range available for various applications

AVX tantalum capacitor, NOJC227M006RWJ original spot, ideal for high-performance circuits

Electronic scale crystal oscillator, 3.2*2.5mm (3225), 16M (16.000MHZ), 12PF, 10PPM, 20PPM, 30PPM

Cement-free calcium oxide meter

The operation is very simple and consists of four main steps:

1. When using this instrument, make sure it is properly leveled on a stable surface.

2. Before placing the conical flask, manually lift the movable rod upwards. Then place the conical flask on the platform and slowly lower the rod. Ensure that the condenser is properly connected to the conical flask for efficient heat transfer.

3. Fill the bucket with water up to three-quarters of its capacity, approximately 1500ml. To add water, first use a screwdriver to remove the screw, open the top part of the instrument, fill the bucket with water, and then reattach the back cover securely.

4. After turning on the power, you can press the [Heating] key to start preheating, the [Stir] key to mix the contents, or the [Cool Down] key to initiate cooling. For automatic operation, set the desired running time first, then press the [Start/Stop] key to begin the process.