1, measuring contact resistance
With the universal meter's resistance file, measure the normally closed contact and the moving point resistance, the resistance value should be 0; and the resistance value of the normally open contact and the moving point is infinite. This can distinguish the normally closed contact, which is the normally open contact.
2, measuring coil resistance
The universal table R×10Ω can be used to measure the resistance of the relay coil to determine whether there is an open circuit in the coil.
3, measuring the pull-in voltage and pull-in current
To find adjustable power supply and current meter, input a set of voltage to the relay, and in the power supply circuit in series to monitor the current meter. Slowly increase the voltage of the power supply. When you hear the sound of the relay, record the pull-in voltage and the pull-in current. For accuracy, try several times and average.
4, measure the release voltage and release current
The connection test is also performed as described above. When the relay is pulled in and then the supply voltage is gradually reduced, when the relay is heard to release the sound again, the voltage and current at this time are noted, and it may be tried several times to obtain the average release. Voltage and release current. Under normal circumstances, the release voltage of the relay is about 10~50% of the pull-in voltage. If the release voltage is too small (less than 1/10 of the pull-in voltage), it cannot be used normally, which will threaten the stability of the circuit. The work is not reliable.
With the universal meter's resistance file, measure the normally closed contact and the moving point resistance, the resistance value should be 0; and the resistance value of the normally open contact and the moving point is infinite. This can distinguish the normally closed contact, which is the normally open contact.
2, measuring coil resistance
The universal table R×10Ω can be used to measure the resistance of the relay coil to determine whether there is an open circuit in the coil.
3, measuring the pull-in voltage and pull-in current
To find adjustable power supply and current meter, input a set of voltage to the relay, and in the power supply circuit in series to monitor the current meter. Slowly increase the voltage of the power supply. When you hear the sound of the relay, record the pull-in voltage and the pull-in current. For accuracy, try several times and average.
4, measure the release voltage and release current
The connection test is also performed as described above. When the relay is pulled in and then the supply voltage is gradually reduced, when the relay is heard to release the sound again, the voltage and current at this time are noted, and it may be tried several times to obtain the average release. Voltage and release current. Under normal circumstances, the release voltage of the relay is about 10~50% of the pull-in voltage. If the release voltage is too small (less than 1/10 of the pull-in voltage), it cannot be used normally, which will threaten the stability of the circuit. The work is not reliable.
19.5V Plug in AC/DC Adapter were widely used for any small power device, such as CCTV Cameras, wireless routers, LED strip, ADSL cats, HUB, switches, security cameras, audio/video power supply. For 19.5V wall mount power supplies, the maximum output current is 1.85A,total 36W output. Our power adaptor meets different certificates for different countries` request – like UL/cUL/CCC-CQC/ PES/SAA/C-TICK/CB/GB certificate. All our switching power adapter were getting 2-hours burn-in test & 3KV high voltage test during production.
19.5V AC DC Switching Power Adapter
19.5V AC DC Switching Power Adapter,19.5V DC Switching Power Adapter,19.5V AC Switching Power Adapter
Shenzhen Juyuanhai Electronic Co., Ltd. , https://www.powersupplycn.com