Taiwan, China has made new changes to its list of statutory inspections, and companies that export massage equipment and compact fluorescent lamps need to pay attention. It is reported that Taiwan Province has recently formulated inspection specifications, and the above products required to enter the Taiwan market are subject to inspection by the Taiwan Standards Inspection Service (BSMI). The export of massage equipment must meet the safety and EMC test requirements, while compact fluorescent lamps are required. The inspection requirements of CNS14576 must be met, which will take effect on March 1, 2009 and January 1, 2010, respectively.
The above-mentioned product export enterprises must pay special attention to the following points: First, the products subject to legal inspection belong to different HS code ranges. Massage devices are classified as HS codes in Chapters 85 and 90, and compact fluorescent lamps are covered in Chapter 85 of HS Codes. Second, the regulations stipulate the applicable conformity assessment procedures for the above products. Manufacturers and importers may choose either the Product Certification Registration System (RPC) or the Batch Approval Type Inspection Program (TABI) as the basis for product conformity assessment.
It is reported that in addition to massage equipment and compact fluorescent lamps are listed in the statutory inspection catalogue, current electric shredders, digital recording and playback equipment, electric ice cabinets, air filters and other electronic appliances must be inspected when they are imported or placed in the Taiwan market. EMC testing and related testing requirements, otherwise refused entry. In addition to China and Taiwan, countries continue to introduce new controls on legal inspection products, and gradually ensure the circulation of safe, healthy, healthy and environmentally friendly commodities around the world. Therefore, looking at the trend of constantly adjusting the list of legal inspections, it can be seen that goods with hidden security risks and those that do not meet the requirements of legal inspection will eventually have difficulty obtaining market sales rights.
Mainland China has maintained its export momentum to Taiwan's mechanical and electrical products. According to statistics from the Ningbo Inspection and Quarantine Bureau, in 2007, the 10 major categories of mechanical and electrical products exported to Taiwan in Ningbo exceeded US$4.04 million, of which fluorescent lamps and energy-saving lamps accounted for a certain proportion. Therefore, the list of newly added statutory inspection products in Taiwan will exert certain pressure on China's export of the above products. Inspection and quarantine experts warn that the regulations are approaching, enterprises must carefully understand the requirements of the importing areas or countries in the statutory inspection of products, must constantly improve the production technology level of the enterprise itself, promote the structural upgrade of mechanical and electrical products, and strengthen the internal performance in the improvement of product performance. Training to improve the competitiveness of mechanical and electrical products in the international market. In addition, we must pay attention to the selection of product conformity assessment procedures, try to ensure that the products meet the requirements of safety testing and other aspects, and reduce unnecessary export risks.
1
FR4 Material (or Fr4 Board ) is a grade designation assigned to glass-reinforced epoxy laminate sheets, tubes, rods and printed circuit boards (PCB).
FR-4 is a composite material composed of Woven Fiberglass Cloth with an epoxy resin binder that is flame resistant (self-extinguishing).
FR-4 (or FR4) glass epoxy material is a popular and versatile high-pressure thermoset plastic laminate grade with good strength to weight ratios. With near zero water absorption, FR4 Epoxy Sheet is most commonly used as an electrical insulator possessing considerable mechanical strength. The material is known to retain its high mechanical values and electrical insulating qualities in both dry and humid conditions. These attributes, along with good fabrication characteristics, lend utility to this grade for a wide variety of electrical and mechanical applications.
FR4 Laminate Sheet is also used in the construction of relays, switches, standoffs, busbars, washers, arc shields, transformers and screw terminal strips.
Our company is customer-centered, integrity-based and user-conscious. We will try our utmost to provide our customer with supreme service.
The main difference between Us and other supplier1.Using the vacuum press machine to laminate
2.Imported epoxy fiber glass cloth from Taiwan
3.All the laminate layer is consisted of pre-preg ,no non dipped aliki Fiberglass Cloth in the inner layer
4.Vergin brominated epoxy resin coated,without any filler
5.ISO ,UL ,REACH,RoHS certificated
FR4 Material
FR4 Epoxy Sheet,FR4 Epoxy Plate,FR4 Material,FR4 Laminate Sheet,Fr4 Board
JinYuan Group-NingBo JinYuan Insulation Material Co.,Ltd , http://www.ccl-manufacturer.com