Tender Notice for Tender Agency and Cost Consultation Service of Park Landscape Project

Title: Tender Notice for Tender Agency and Cost Consultation Service of Park Landscape Project Tender No.: AJN090032-01FG Announcement Date: February 26, 2009 Deadline: March 3, 2009 Tendering Agency: Nanjing Jiangning Economic and Technological Development Corporation : Jiangsu Province - Nanjing City Content: 1. The waterfront park landscape project of the Jiangning District Headquarters Economic Base of our Nanjing Jiangning Economic and Technological Development Corporation project has been approved by the project. The source of funding for the project is self-raised and has been implemented. Eligible bidders are invited to participate in the prequalification of the project. The total investment of the project is about 150 million yuan.
2. Nanjing Jiangning Economic and Technological Development Corporation (tender) is specifically responsible for the tendering of bidding agents and cost consulting services for this project.
3. Project Overview
(1) Project location: Jiangning Development Zone
(2) Approval number: Ningjing Management Committee issued [2009] No. 33
(3) Project content: river improvement, urban lighting, garden landscape, etc.
(4) Planned start time: June 20, 2009
4. The bidding content is the bidding agency and cost consulting service for supervision, construction, material equipment procurement, etc. of the waterfront park landscape project of Jiangning District Headquarters Economic Base. The bidding for this project is divided into 1 bidding section.
5. The necessary qualifications and information provided by the applicant:
(1) If an enterprise is legally established and registered in the administrative area of ​​Nanjing, and enjoys civil rights and assumes civil liability independently, it does not include branches.
(2) The applicant is not in the state of being ordered to suspend business, the bidding agency and the cost consulting qualification are cancelled or the property is taken over, frozen and bankrupt;
(3) Since 2007, the company has not been deducted or publicly notified or exposed for bad behavior; the company has not been suspended by the relevant departments to undertake the qualifications of bidding agency and cost consulting business and is in the suspension period;
(4) Credit management manual for members of the enterprise and agency project team;
(5) Qualification category and grade of enterprise-level project leader: Grade A qualification of project bidding agency, Grade A qualification of project cost consulting project leader: Intermediate and above professional title of construction engineering, agency certificate, personal credit management manual The administrative punishment record and the score of bad behavior accumulated less than 6 points;
(6) The company has undertaken the performance of the bidding agency for the municipal project (successful bid amount of more than 70 million yuan) since February 1, 2006 (the original contract of the agency contract, the original evaluation opinion form, the notice of winning the bid, the time of the agency contract) The time of signing shall prevail, and the amount of the winning bid shall be subject to the notice of winning the bid);
(7) Power of Attorney;
(8) This project does not accept the form of joint bidding;
(9) The important contents of the pre-qualification application shall not be untrue or false statements;
6. Registration: Applicants are required to apply for the “Company Letter”, the legal person's power of attorney and the manager's ID card to register at the following locations and obtain pre-qualification documents;
On-site registration time (days 1-4): February 25th to March 2nd, 2009 (9:00 am to 11:30 am, 14:00 to 17:00 pm);
On-site registration location (days 1-4): Room 2303, No. 166, Jiangjun Middle Road, Jiangning Development Zone;
On-site registration time (Day 5): March 03, 2009 (9:00 am to 11:30 am, 14:00 to 17:00 pm)
On-site registration place (Day 5): Trading Hall, 2nd Floor, Jiangning Sub-center, Nanjing Construction Engineering Trading Center (No. 6 Qinhuai Road, Jiangning Development Zone)
7. Prequalification documents and prequalification time
(1) Time for submitting prequalification documents: March 5, 2009 (9:00 am to 11:30 am, 14:00 to 16:30 pm);
(2) Submit the prequalification document Location: Room 2303, No. 166, Junjun Middle Road, Jiangning Development Zone
(3) Pre-qualification location: Room 2303, No. 166, Jiangjun Middle Road, Jiangning Development Zone
8. Determining the potential bidder method: The bidder will all be identified as a potential bidder if all necessary qualification criteria are passed.
9. Bidding documents: no charge
10. The application for prequalification must be sealed. The prequalification manager must carry the original documents in accordance with the prequalification documents in addition to the identity document of the person and the power of attorney representative. The person in charge of the project must be present to participate in the prequalification, otherwise it will be deemed to automatically waive the prequalification.
Applications for pre-qualification that are overdue or do not meet the requirements will be rejected.
Contact information of the tendering agency:
Tenderer: Nanjing Jiangning Economic and Technological Development Corporation (official seal) Company Name: Nanjing Jiangning Economic and Technological Development Corporation Contact: Zhou Gong Tel: 025-52110133 E-mail: Fax: 025-52110133 Postal Code: Address: Jiangning District General 166 Middle Road

Rotary Switch Food Blenders

Rotary Switch Food Blenders by turning the knob to control blenders. Usually Rotary Switch Food Blenders have 2 or 4 speeds with pulse. And safety lock is optional.

Discription of Rotary Switch Food Blenders

Size: 1.0L,1.25L, 1.5L, 1.6L

Housing: ABS, PP, Stainless steel

Speed: 2 or 4 speeds with pulse

ABS Housing Rotary switch blenders



Rotary Switch Food Blenders

Rotary Switch Food Blenders,Juicer Blender,Baby Food Blender,High Speed Stand Blender

Flying Electronic Co., Ltd , http://www.flyingelectronic.com

This entry was posted in on