- Model NO.: PD3-12(F)
- Type: Current Fuse
- Shape: Insert
- Fusing Device: Fuse
- Trademark: ZhenLi
- Specification: cooper
- HS Code: 8535100000
- Breaking Capacity: High
- Usage: High Voltage
- Fusing Speed: FF
- Standard: UL
- Transport Package: Carbon
- Origin: Xi′an
The 100A carrier fuse will hold the fuse part of rated current 6A~ 100A.The fusible parts of 200A will hold the fuse of the rated current 100A~ 200A.For pending the use of occasions, the appropriate fuse specification and type choice is to continue with to carry load current, protection of equipment type and other overcurrent protection with the equipment requirements and change.The types of protective equipment include circuit breakers, power cooperators and other fuses, and cables and lines.
PD3 fuse provides a variety of fault current breaks.Flexibility to be achieved by using the release cap or fusing expansion cap.The 100A release cap is designed to exhaust under pressure of 13780kPa, and the 200A release pressure cap is read as 8957kPa exhaust.Pressure relief cap make PD3 from ionized gas fuse tube more efficiently and greatly improve its ability of breaking extension cap using pieces of fuse in the requirements of the single spray configuration, fusing a extension fusible unit in a lower position, so as to reduce a large number of pipe pressure, these make the fusion tube with higher breaking capacity.
environment:
The base of PD3 series products consists of embedded mechanical structure and insulator.The metal rod of the installation mechanism USES special adhesive materials to bond with insulators, which can withstand the electric power generated when the short circuit current is broken.
The F type fuse provides a solution to the capacitance current caused by the inductor to the pole in the subsurface feeder cable.
properties of product:
The base of PD3 series products consists of embedded mechanical structure and insulator.The metal rod of the installation mechanism USES special adhesive materials to bond with insulators, which can withstand the electric power generated when the short circuit current is broken.
The F type fuse provides a solution to the capacitance current caused by the inductor to the pole in the subsurface feeder cable.
Â
Led Module Back Light are applied to all kind of slim light advertising box, with a wide range applications for signs and indoor house project. High quality brand lens for cree, aluminum board, with two years warranty . offer you a professional service, Wide range chioces ; SMD module back light source, waterproof module back light, outdoor Led Back Light, ultra thin led light box, can satify your requirement .
LED Module Back Light
Led Module Back Light,Led Back Light,Back Light For Light Box,Plastic Light Module
Shenzhen Relay Lighting Electrial Appliances Co.,Ltd , http://www.relay-lighting.com