Design of Ethernet Gateway Node in Energy Saving Metering System

Author: Beijing Bo-controlled automation Technology Co., Ltd. Technical Director Liu Kai
Background

Energy consumption monitoring system: refers to the hardware system that realizes online monitoring and dynamic analysis functions of key building energy consumption by collecting classification and sub-item energy consumption metering devices for buildings and large public buildings, using remote transmission and other means to collect energy consumption data in time. A general term for a software system.

The core of energy monitoring technology is energy optimization, and the premise of optimization is accurate energy metering and measurement of energy consumption in the optimization process. This has evolved from a simple data set such as “sheet reading” in the traditional sense to “online data aggregation and control”, which puts higher demands on the network.

First, the network requires two-way speed. Second, a flexible network architecture is required. The third requirement is that the network can accommodate enough nodes.

The following figure is a typical network diagram:

Network diagram

Wireless, PLC or Ethernet and wireless hybrid networking can be used for each building or relatively independent WPAN. The structure inside the WPAN is shown below:

WPAN internal structure chart

In the figure, the collection nodes evolved in the form of energy consumption collection and control. There are three forms from the first public buildings and factories and mines, to the collection sockets and wireless lights for home and office as shown below. The more you come.

Current detection socket

Wireless light control device

The Fan Motor – an important component in industrial facilities.
Fans and their motors have become indispensable in modern industrial plants. Whether for ventilation of warehouses, cold stores for cooling or just for fresh air – fan motors are everywhere. The various fans available hardly differ in terms of function, but rather in their area and in the area of use. It is easy to recognize that a fan for cooling must meet other requirements as a fan for air-conditioning systems. Further attention should be paid to the control and energy efficiency. For new regulations, for example by frequency inverters, the energy consumption is reduced, and the life of the fan motors is also prolonged.

Furnace Blower Motor

Fan Motor,Bathroom Exhaust Fan Motor,Cooler Fan Motor,Hvac Blower Motor,Blower Fan Motor,Electric Fan Motor

Shenzhen Maintex Intelligent Control Co., Ltd. , https://www.maintexmotor.com

This entry was posted in on