Detailed explanation: What are the anti-static requirements for LED display?

We know that electronic products have high requirements for electrostatic protection, especially for precision electronic components. The powerful LED display manufacturers are doing better in terms of manufacturing process and anti-static. Let’s look at it together. LED display static protection knowledge.

The importance of anti-static measures for LED displays cannot be ignored. The following are some instructions for static electricity and anti-static:

1. Source of static electricity: The static electricity sources that affect the circuit mainly include human body, plastic products and related equipment. Among them, the static power source from the use environment has the following items:

1) Objects and materials.

2) Floor, work table and chair.

3) Work clothes and packaging containers.

4) Painted or waxed surfaces, organic and fiberglass materials.

5) Cement floor, painted or waxed floor, plastic floor tile or floor leather.

6) Chemical fiber overalls, non-conductive work shoes, clean cotton overalls.

7) Plastic, box, box, bag, tray, foam pad.

2. Failure mode of electrostatic discharge: sudden failure and potential failure.

3, anti-static measures:

1) Training of static electricity knowledge and related technologies for personnel using static sensitive circuits.

2) Establish an anti-static work area, use static-discharge floor, anti-static workbench, anti-static grounding lead and anti-static device in the area, and control the relative humidity to 40 or above.

3) The damage caused by static electricity to electronic equipment may occur in some small details in peacetime, and attention should be paid to the details.

4) ESD damaged equipment should be marked and should not be confused with normal equipment.

5) ESD safety and control procedures: establish a complete ESD static management system to enhance the usual detection.

4, transportation and packaging

ESD sensitive equipment should always be stored in an antistatic bag or container during daily operation.

The above is the protection knowledge of electrostatics in LED display. In production and life, it is worthy of our high attention, so as to minimize the damage caused by static electricity.

Ceramic Fan Heaters is a Fan-forced space heaters have a fan behind the PTC heating element to push warmed air outward, so they heat the room quicker than radiant heat models. Ceramic heater make a bit more noise than radiant heat styles, which are typically silent, But we call it White NoiseAs you might imagine, the main component of a Fan Heater is the fan motor, which moves air pass a PTC heating element and then into the room or office. The most common source of heat for fan heaters is electricity. Portable models are plugged into a power outlet, which provides the heat to warm the air being passed through the PTC heater.

Ceramic Fan Heater inclduing portable PTC heater, Wall mounted PTC heater, Ceramic tower heater.

if you want to get more info, pleae contact us

thanks

Ceramic Fan Heater

Dimplex Ceramic Tower Heater,Arlec Ceramic Heater,Comfort Zone Oscillating Heater,Ceramic Tower Fan Heater

Fenry manufacturing Co., Ltd , https://www.cnfenry.com

This entry was posted in on