First, the parking lock overview
This article refers to the address: http://
Today, as parking spaces become increasingly tense, how to avoid private parking spaces being taken over by others is a headache. A new type of parking lock in front of the city not only effectively solves this problem, but also acts as an anti-theft device for vehicles, which is very popular among car owners. The special parking lock can effectively and politely prevent other vehicles from occupying the special parking space: when the car arrives near the parking space, the parking lock can be opened to stop the car into the parking space; when the car leaves, lock the parking space lock to prevent other vehicles from occupying the parking space; After the car is parked in the parking space, the parking space lock is locked and the vehicle can be used for anti-theft. At the same time, the parking lock management is increased, and the parking lot can improve the parking lot and facilitate the management of the parking lot.
According to the control method, the parking lock can be divided into manual parking lock, remote parking lock and automatic induction parking lock. The manual parking lock can open or close the parking lock with a special key; the handheld wireless remote control can control the rise or fall of the parking lock within 20 meters, which is the remote parking lock; the automatic induction parking lock is divided into wireless RF sensing and Bluetooth. Automatic induction type, when the owner's car is within 20 meters of the parking lock, the parking lock automatically unlocks and falls. When the owner's car is far away from 20 meters, the parking lock automatically rises and locks.
Second, wireless automatic inductive parking lock
The wireless automatic inductive parking lock is a wireless automatic induction parking lock that has been developed by our company for many years. It cooperates with the famous parking lock company in China and is the first in China. The parking lock automatically senses the position of the vehicle and realizes the function of â€œcar to lock and lockâ€, completely freeing human operation. It also avoids the phenomenon that the owner forgets to raise the parking lock when he leaves, ensuring that nothing is lost. While we enjoy the ease of high-tech, we avoid the high cost of using Bluetooth sensing.
1, working principle:
The automatic induction parking lock is a radio frequency identification technology, referred to as RFID. The user is equipped with an electronic tag card. When the vehicle arrives at the parking space, the parking lock receiving end automatically recognizes the ID number emitted by the electronic tag card. The parking space lock is automatically lowered by the information processing, and the vehicle enters the parking space at this time, when the car leaves. If the electronic tag card launch ID number is not received, the parking space lock automatically performs the rise, which can effectively prevent other vehicles from occupying the parking space.
2, product features
Auto-sensing parking locks effectively and politely prevent other vehicles from occupying dedicated parking spaces. When the owner's car arrives near the parking space, the parking lock automatically drops and the car can stop in the parking space; when the owner's car leaves, the parking lock automatically rises to prevent other vehicles from occupying the parking space.
Automatically sense the vehicle, easy to use;
Intelligent coding technology, no mutual interference, practical and reliable;
Automatically decline when the rise is blocked;
Low-voltage alarm, over-current alarm and other functions;
It has general waterproof function, simple installation and low failure rate.
3, the main performance parameters of the product
Working environment: -20~55Â°C;
Protection level: IP65, anti-spray;
Working power supply: DC6V;
Power usage time: 30-50 days
Automatic sensing distance: 20-30 meters;
Length of rise and fall: 6 seconds;
4, the installation and use of the product
A. After opening the package, connect the battery plug to the control board plug and fix it; after 12 seconds, the parking lock will automatically rise or fall (depending on the location of the electronic label); the parking lock should not be installed in a low-lying place or a place where water is accumulated.
B. According to the specific situation (depending on the size of the parking space), it is better to prevent other vehicles from reversing after installation. Select the installation position and drill a 14mm bottom hole on the floor at the corresponding hole position of the parking lock base.
C. Install the M10mm expansion screw in the ground face, put on the parking lock, then tighten the nut and spray the black oil on the screw. At this point, the installation is completed;
5, the use of instructions
A. After the installation is completed, it can be put into normal use immediately.
B. The electronic tag needs to be hoisted on the rear view mirror.
C. When there is no car in the parking space, the parking lock should be in the rising position.
D. When the car arrives within the effective receiving range near the parking space, it should wait for the parking space lock to drop and lower it to the lowest position before parking the car into the parking space.
6, daily maintenance, maintenance
A. The structure is simple and the failure rate is low, which is a major feature of the parking lock.
B. When the parking lock movement slows down and is significantly lower than before, it indicates that the battery should be charged (there is a low voltage alarm).
C. Keep the sanitation around the parking lock, there must be no particulate impurities in the base; add oil every half a year to the parking lock movement.
7, matters needing attention
A. During the ascent or descent of the parking lock, no foreign objects or external forces may obstruct the movement.
B. The parking lock rise and fall time is 4-6 seconds. When the battery voltage drops, the time will be slightly delayed. The maximum or minimum position has not been reached in 10 seconds. At this time, the battery is charged.
C. When cleaning the parking lock, do not rinse the inside of the parking lock directly with water.
D, the battery is best to use timed charging, can extend the battery life of more than 4 years (30-50 days of regular charging, depending on the frequency of use).
Third, other types of parking locks
The parking locks that have emerged in recent years have quickly passed several generations of product forms, and several forms still on the market are as follows:
1, manual parking lock
Use the special parking lock key to insert the keyhole, rotate the key, the parking lock arm automatically falls down and level, remove the parking space key, and the vehicle enters the parking space. After the vehicle has left the parking space. Lift the parking lock arm to the vertical position and the parking lock is automatically locked.
The characteristics of this parking lock are: low price, low grade and manual operation.
2, remote control parking lock
The vehicle owner can level (or raise) the parking controller by simply pressing the dedicated remote control button within 20 meters of the arrival (or departure) parking space. In special cases, it can also be manually turned on with a dedicated key.
The feature of this parking lock is that the wireless remote control replaces manual labor and has become very easy to use.
3, automatic inductive parking lock
At present, there are two ways of inductive parking lock: wireless auto-sensing and Bluetooth auto-sensing parking lock. When the owner's car is close to the parking lock, the parking lock automatically falls; when the owner's car is away from the parking lock, the parking lock automatically rises.
The automatic inductive parking lock is characterized by a fully automatic lifting mode that completely replaces the human operation, improves the grade and makes life easier and more enjoyable.
The wireless automatic inductive parking lock is low in cost and suitable for large-scale promotion;
Bluetooth auto-sensing parking locks are costly and consume a lot of power.
â– Good heat dissipation
--Blade design of copper alloy contacts,good conductivity
â– Super high impact resistance and thermal stability
--Cover pans are made of high quality polycarbonate
â– Chemical corrosion resistance
-- Fingerprint-resistant zinc plated mounting brackets
--One-piece grounding design,No Load-Weather resistance
Generator WR GFCI UL,WR Electrical Plugs UL,GFCI Sockets for Generator,Generator WR GFCI UL Outlet
Hoojet Electric Appliance Co.,Ltd , https://www.hoojetgfci.com