The 2016 China Big Data Industry Summit and China E-Commerce Innovation Development Summit kicked off in Guiyang on the 25th. Qualcomm Global President Derek Aboli said in a keynote speech at the opening ceremony that mobile technology has tremendous power to transform other industries. The Internet of Things and cloud computing are changing the rules of the game to create a complete ecosystem and cooperation. Only by collaborating with partners can we take the lead in industrial transformation.
Today's global data volume is exploding at an unprecedented rate. Aboli first shared a set of data - in 1992, the global Internet generated 100 GB of data traffic takes one day; five years later, in 1997, 100 GB of data traffic took an hour; in 2002, the global Internet generated 100 GB of traffic took only 1 second. bell. By 2019, the global Internet data traffic per second is expected to exceed 51,000 GB. “In fact, 90% of the global data volume has been generated in the past two years. In the foreseeable future, the global data volume will increase at a rate of doubling every two years,†said Aboli.
The Internet of Things is an important factor driving the growth of data capacity. Such a huge data stream is surging in the virtual world through various terminals, and a large amount of data from IoT terminals will flow into the cloud and data center. Sensors with networking capabilities attached to physical entities will continuously collect data on a massive scale and pass them directly into the cloud. Around us, devices and applications such as connected cars, wearable devices, smart TVs, drones, vending machines, etc. are driving the growth of data volume. It is estimated that by 2020, about one-third of these data will enter the data center.
Aboli believes that this trend will double the growth in the number of servers in the data center and will also drive the creation of new operational standards for the data center. Look for solutions that make data centers more efficient and sustainable. On the one hand, it is necessary to make the server run more "cool" energy-saving, on the other hand, it must meet the requirements of "on-demand service" in the cloud computing era, and flexibly respond to peak load. Aboli said that Qualcomm is currently developing a server processor for the new data center, which can achieve this delicate balance between performance, power consumption and cost.
Aboli said that Qualcomm has supported the development of mobile ecosystems with leading technology and extensive cooperation for many years. Seven months ago, Qualcomm provided partners with the first software development platform for them to develop tests. At the same time, they are working with a number of network technology and solution providers to continuously expand the server ecosystem. In addition, Qualcomm, a global leader in mobile technology, has maintained its traditional advantages in 3G, 4G and upcoming 5G technologies, as well as high-performance, low-power mobile system-on-a-chip, accelerating the construction of future-oriented data centers. These leading advantages are crucial in the vision.
Aboli said that China's position in the global Internet is becoming more and more important. Qualcomm also hopes to achieve cooperation with China in 3G, 4G and 5G.
OPT Diamond Cutting Tools Co., Ltd are a professional manufacture in producing Cutter Taps ,Thread Forming Taps,pipe taps etc . We offer a complete range of taps in carbide, CPM and HSS-E.For Carbide Taps , we provied regular stock, and we also provide customization for your designs and logo. It is important to choose a professinonal manufacture to work with you, in order to communicate every details in the design. Our reputation has been built on quality, design and service – all at a competitive price. No matter you are a agent buyer or a factory source for self-use, we will be your most trusted partner.
Carbide taps is used to cut a screw thread in material with a pilot hole, threading is a process of both external and internal machining of threads into a workpiece. A number of angles and measurements defines the thread of the screws and bolts. All are of importance:
The lead is the distance through which a screw advances with one turn in the direction of the shaft. There are single lead threads and multiple lead threads. Multiple lead threads are able to feed faster with fewer revolutions.
The pitch is the distance between the corresponding threads in the axial direction.
The effective diameter is the midway point between the crest and root. In other words, the point where the internal thread and external thread overlap when screws are meshed together. The effective diameter is, along with pitch, one of the most important dimensions in threads.
According to the application, there are several kinds of taps: Machine and hand taps, spiral flute taps, spiral pointed taps, thread forming taps, and Pipe taps and thread milling cutter.
1. Machine and hand taps
The very standard tap, mostly are the Straight flute tap. Typically, tap is constituted by a working portion and a shank portion. The working portion is divided into a cutting portion and a calibration section, the cutting portion having a cutting bevel, responsible for cutting work. The calibration section is used to calibrate the size and the shape of the thread.
2. Spiral flute taps:
The spiral flutes have high cutting performance, eject chips smoothly, leave no chips in the hole bottom, suitable for tapping sticky materials. The chip-hold groove of Spiral fluted tap is spiral. According to the application, they are divided into two kinds: Left spiral flute tap and right spiral flute tap. Left Spiral flute tap tapping the chip to the bottom, suitable for through hole. Right spiral flute tap tapping scraps discharge upwards, so its suitable for blind holes.
3.Spiral pointed taps:
Suitable for through-hole and deep thread, have high strength, long life, fast cutting, dimensional stability, explicit tooth pattern (especially fine tooth). It opens chute in the side of the cutting edge of the straight groove, to form an angle, the chips are discharged forward when threading, suitable for through-hole processing. Relatively large core size design, good strength, can withstand greater cutting force. It is suitable for processing of non-ferrous metals and stainless steel and black metallic.
4. Thread forming taps:
These taps make threads by deforming the materials and do not produce chips. They are suitable for the blind holes of rather soft material or non-ferrous metals. The internally extruded and threaded metal has fibers which are continuous and has high tensile strength and shear strength, and has good surface roughness too.
5. Pipe taps
The pipe taps are used for mechanical joints purpose which is cutting the pipe fitting threads. There are two kinds of types, taps for parallel threads and taps for taper threads. The parallel threads are used for mechanical joints. The taper threads are used for pressure type joints such as water pipes and gas pipes.
6. Thread Milling cutter:
The thread milling cutter is a new developed processing tool in recent years. Its the combination of the milling cutter and the tap, using milling for machining the thread, so we call it the thread milling cutter. It is suitable for processing the large aperture work piece, avoid the disadvantage of high cost for large size Taps.
We are specialize in manufacturing PCD diamond tools and Carbide tools. Our major product include PCD Inserts , PCD Reamers , PCD End Mills , PCD Taps, Carbide Inserts, Carbide Drills, Carbide Reams, Taps etc.. Premium quality of raw material is used in the production and strict examination during processing with advanced equipment. Our best selling of cutting tools include PCD Inserts, PCD End Mill, PCD Reamer, Carbide Taps, Carbide End Mills, Special Form Cutter and many more.
Target of our OPT cutting tools is always to improve your productivity and lower total cost. If you encounter problems such as high-speed, high precision requirements, low tool life and so on in the processing, you may contact us to recommend appropriate design for you, we can provide customization per your drawing. We looking forward to make a long business relationship with you.
PRODUCT DETAIL:
PRODUCTING PROGRESS:
PAYMENT AND DELIVERY:
PRODUCT EQUIPMENT :
+
ABOUT US :
We are specialize in manufacturing PCD diamond tools and Carbide tools. Our major product inclulde PCD inserts, PCD Reamers, PCD End Mills, PCD Taps, Cabide Inserts,Carbide Drills, Carbide Reams, Taps etc.,
We also offered customized cutting tools per drawings, and provide package according to customer requirements. We manufacture a series range of cutting tools for machining of Cast iron, Aluminium alloy and Non-Ferros metal, it is widely used in all major sectors like Automobiles, Engineering, Aerospace, Aviation and 3C industry. Premium quality of raw material is used in the production and strict examination during processing with advanced equipment, so our client are satisfied with our reliable quality and on-time delivery.
Our best selling of cutting tools include PCD Inserts, PCD End Mill, PCD Ball Nose Mill, PCD Reamer, Carbide Taps, Carbide End Mill, Special Form Cutter and many more. For these years we have been made a large forward in the technologies of manufacturing cutting tools. With high quality on performance and price, our product sells well both on domestic and overseas market. And we will always focus on the quality and best service, to make long business relationship.
quanlity control:
We have dedicated team of quality control and precise equipment to keep good and stable performance for our products and processing services.
Carbide Taps
Carbide Taps,Thread Tap,Solid Carbide Taps,Pipe Tap Set
OPT Cutting Tools Co., Ltd. , https://www.optdiamondtoolss.com