Glare is one of the common problems encountered in lamps, and the glare of downlights is the most representative. Many designers don't understand how to avoid glare from lamps or how to choose the right anti-glare fixtures. 
Today, I will teach you six ways to solve glare. Before we start, let's take a look at the situation. Under what circumstances, the human eye will feel "glare" and what kind of lamps are anti-glare.
Figure: The normal eyesight range of the human eye is 30° above the head-up to 60° below, and the glare in this range is glare.
Figure: As long as the light emitted by the luminaire is controlled within a cut-off angle of >30°, it can be said that the luminaire is anti-glare.
So, how should we solve the glare problem of lamps? Come! Learn these six tricks, glare to go without a trace.
Shading angle > 30 degrees
The normal light-shielding angle of the luminaire is based on the normal eyesight angle of 30 degrees, and the light-shielding angle of the luminaire is greater than 30 degrees to prevent direct light from entering the human eye.
Increase the installation height of the light source
The deep-lighting luminaire increases the installation height of the light source in the case of other structures, so as to increase the shading angle.
Conventional lamps + cross anti-glare lamps
The cross anti-glare grille mainly blocks light in both directions. Adjust the critical position of the glare from the boundary to the center of the lamp, and then increase the shading angle to achieve the purpose of anti-glare.
Conventional lighting + honeycomb anti-glare
The honeycomb anti-glare grille can block light in all directions. It is the best anti-glare effect in all anti-glare fittings, and the shading angle can be close to 90°. It is also the biggest loss of light.
Conventional lighting + shading
The shading leaves can block all directions, and it is easy to shape the light. It can form the light-shielding angle of the lamp itself to completely block the light. It is the most flexible anti-glare accessory and the most cool shape factor.
Therefore, the accessories are larger and generally used in conjunction with the track lights to enhance the overall image of the decoration while preventing glare.
Soft glass
Soft glass includes frosted glass, cloth glass, cloth + frosted glass, etc., all of which can reduce the brightness of the surface of the light source to a certain extent, and achieve anti-glare effect to a certain extent.
Well, learn these six strokes, from now on, no longer glare, glare problems from now easy!
JIANGMEN LEDERLIGHT LIGHTING Co.,LTD , https://www.lederlightcn.com