Larson Introduces New Military Grade Infrared LED Strips

Larson Electronics recently introduced an infrared LED strip that emits 1400 feet of invisible light, designed for high-power infrared illumination in demanding applications with night vision devices and devices. According to reports, LEDLB-60ET-IR infrared LED strips can withstand the harsh operating conditions in military and professional applications, providing a powerful and durable low profile infrared lighting solution to help improve night vision equipment, surveillance cameras and other invisible The performance of infrared lighting equipment.

According to Larson Electronics, the invisible infrared light emitted by the strip can only be seen with the aid of night vision equipment; the product offers 850nm models for general surveillance cameras and night vision glasses, and 940nm models for the latest generation of military night vision equipment. . This LED strip integrates multiple Sixty Edison Edixeon® 3W infrared emitters that have been specifically paired and arranged according to high-efficiency optics to deliver infrared beams up to 1450 feet away and 240 feet wide. For wider coverage, customers can also order a 490-foot by 450-foot wide floodlight configuration.

The unit's outer casing is made of lightweight, high-strength die-cast aluminum, and its non-destructive polycarbonate lens provides excellent scratch and impact protection. The entire unit is IP68 rated, which means it can withstand 3 meters of water immersion and the test of heavy downpour and harsh outdoor conditions. In addition, it is highly resistant to vibration damage and can accommodate temperatures from -40 ° C to 85 ° C, making it suitable for automotive applications in extreme terrain and temperature conditions.

The product integrates an advanced LED driver that actively manages heat and voltage, so it can operate at full power without compromising performance or lifetime, and can be used directly at 9-42 VDC. The device can be anchored to any plane with the included trunnion bracket and the vertical position is adjustable.

At the same time, the strip includes a small wiring harness with a DeutschIPD/LADD connector (with a matching plug) to make the wiring of the device simple and straightforward. Tailor-made cut-off filters enable the LEDLB-60ET-IR infrared LED strip to replace the old concealed installation of halogen and HID lamps, helping to reduce the cost, equipment size and consumables in applications such as state hunting guards that use nighttime infrared illumination. Quantity.

The PV Charge Controller works as a voltage regulator, its primary function is to prevent the Battery from being overcharged by the P.V array, being overly discharged by the load, or both.

Controller types:

• Single Stage controllers:

This type of controllers prevents battery overcharging by switching the PV array off when the battery voltage reaches the state of charge set point. The array and battery are automatically reconnected when the battery voltage reaches a lower value called the charge resumption.

• Pulse Width Modulation (PWM) controllers:

PWM controllers are the most common controller on the market today. These charge the battery by rapidly switching the full charging current on and off when the battery reaches a fully charged state. The length of the charging current pulse gradually decreases as battery voltage rises, reducing the average current into the battery.



Solar Street Light Controller

Solar Street Light Controller,Solar Charger Controller,Programmable Controller,Light Controller

Delight Eco Energy Supplies Co., Ltd. , https://www.cndelight.com

This entry was posted in on