2. Performance and price ratio is a very important factor. To compare the prices of various products, even if you have a good product to recommend, it is best to let customers choose.
3. Compatibility and scalability, each smart home project will have this requirement. Many projects will have many changes even during construction. Never make unchangeable designs.
4. Transition technology considerations. At present, all smart home technologies are transitional and have not yet matured. Therefore, it is better to choose compatibility, and it is best to comply with international general agreement.
5. Complexity, whether wiring installation is simple or not directly related to cost, scalability, maintainability, must choose a simple wiring system, whether it is simple to use, it is also important.
6. Security, including whether it is easily destroyed by others, and some products can be controlled by each other in the remote control neighborhood.
7. After considering the above matters, you can start designing smart homes in order to make a complete smart home design process, samples, forms, and drawings.
Function realization
The network switch keeps all the functions in the home with the following functions while maintaining the functions and features of the common switch:
Soft start function: When the light is turned on, the light gradually turns on. When the light is turned off, the light gradually disappears, eliminating the sudden change of brightness to the human eye, protecting the eyes, reducing the impact of current and filament temperature, prolonging the service life, and protecting the light bulb. .
Dimming function: Both can be adjusted to light and dark, with 64 levels of brightness, arbitrarily set.
Memory function: The brightness set by the computer when it was turned on for the previous time is automatically restored when the light is turned on next time.
In the foyer, use the network switch on the wall
Scene setting: After entering the door, you don't need to operate one by one, you can achieve the preset light mode effect with one touch.
Fully open: Press one button to turn on all lighting in the home.
Full clearance: Before going out, you don't need to check one by one, you can turn off all the lighting fixtures in the home and the ventilation fan of the bathroom.
Variable switch: Each button can also be reset when needed to change its control object.
Soft start, dimming, and memory functions are available when controlling the lamp.
At the bedside, use a centralized controller
Centralized control: It can control any lighting fixtures in the home and the ventilation fan of the bathroom.
Soft start, dimming, and memory functions are available when controlling the lamp.
Full off: Before going to sleep, press a button to turn off all the lighting fixtures in the home and the ventilation fan of the bathroom.
Fully open: When needed, press a button to turn on all lighting in the home. There is also greater flexibility, and the centralized controller can be used in any room in the home.
Use a wireless remote control anywhere in your home
All remote control: can control any lighting fixtures in the home and the ventilation fan of the bathroom.
Full off: Press one button to turn off all the lighting fixtures in the home and the ventilation fan of the bathroom.
Fully open: Press one button to turn on all lighting in the home.
Soft start, dimming, and memory functions are available when controlling the lamp.
Fingerprint Lock Motor introduction:
Basic security work, lock body responsible for the security door lock body responsible for opening and closing lock, the lock body Lock Motor is of crucial importance.
Functions: it is widely used in various intelligent locks, such as Shared bicycle lock, fingerprint lock, glass lock, safe lock, hotel lock, family lock, inductive smart lock, etc
Features:Fingerprint Lock Motoris based on micro precision reducer development, small intelligent micro precision reducer can do 10 mm in diameter, is widely used in safe, locks, smart locks, sensor intelligent lock;
This kind of motor has the characteristics of low noise, low energy consumption, small volume, light quality, high precision, large torque and durability
Method of use: the best stable in horizontal plane, installed on the Fingerprint Lock Motoroutput shaft parts, cannot use a hammer to knock, knock prone to press into the dc Fingerprint Lock Motor drive, may cause damage to internal components, and cannot be used in the case of blocked.
Operating temperature range:
lock motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a lock motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
Fingerprint Lock Motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
The longevity of Fingerprint Lock Motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you
Looking forward to your inquiry. Welcome to our factory.
Fingerprint Lock Motor
Fingerprint Lock Motor,Motor For Fingerprint Lock,Gear Motor For Fingerprint Lock,Dc Motor For Fingerprint Lock
Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com