Error alarm For the user's wrong input, the characteristics of the software automatic software. This software package can carry out the interactive drawing of the parameterization of the gear shaft gear shaft part drawing in the series or specially designed involute cylindrical gear transmission products. The modification and expansion can be used to draw parts drawings of other types of gears such as arc gear worm bevel gears. Practicality and flexibility. By changing one or several parameters, parts of different shapes or sizes can be drawn. High degree of automation and fast drawing speed.
This software package can automatically select the drawing size and drawing scale, automatically layout, automatically generate views, can automatically query and mark dimensions tolerances, geometric tolerances, surface roughness, gear accuracy inspection project tolerances, automatic calculation of part weight, automatic Fill in the gear parameter table and technical conditions in the title bar. Therefore, it not only greatly reduces the labor of the designer, but also significantly improves the drawing speed. Compared with manual drawing, the drawing efficiency can be doubled. For most projects, if users are not satisfied with the automatic value of the software or have special requirements, they can easily specify or select and implement manual intervention. Software development strictly implements the relevant technical standards, such as mechanical tolerances, gear precision gear drawings, etc. The drawings drawn are standardized and beautiful. Friendly interface, easy to use, reduce errors and improve efficiency. Conclusion This paper adopts object-oriented software design ideas, puts forward a set of computer drawing methods for gear parts, and develops a more complete set of computer drawing software packages for typical involute cylindrical gear parts. The software package has the characteristics of strong practicability, high degree of automation, low hardware requirements, friendly interface, and easy to use. It has high practical value and commercialization level. After drawing and using the gear shaft parts of the relevant manufacturers, satisfactory results have been achieved and the design quality has been improved.
IP66 / IP67 waterproof d-sub connectors-Designed for IP Performance
ANTENK has developed IP66 / IP67 waterproof d-sub connectors that utilize a proprietary sealing technology, which maintains the same physical size and footprint as standard d-sub products.
Antenk's line of Waterproof d-sub connectors utilize an innovative sealing technology eliminating the need to redesign enclosures and PC boards when implementing IP67 design upgrades.These connectors are designed for applications that require protection from heavy spray or are exposed to short-term submersion. Connectors are available in vertical and right angle board mount types as well as solder cup for panel mount cable applications. Standard D-Subs are available in 9 pin , 15 pin , and 25 pin positions, and high density D-Subs are available in 15 pin, 26 pin, and 44 pin positions
Applications of Antenk waterproof d-sub connectors:
Hand held computers, scanners, and printers that are used outdoors
Remote sensors, gauges, and data loggers that are used outdoors
Industrial and Medical equipment that is routinely subject to wash down
Transmitters and emergency beacons that are subject to temporary submersion
Gas, Electric, and Water metering systems that have embedded Smart Grid electronics
Portable electric generation equipment (Gen Sets)
Consumer and Commercial boating electronics (Radios, Scanners, Radar, DC Power Ports)
IP67 D-SUB | WATERPROOF CONNECTORS FEATURES & BENEFITS
Signal / Low Power in 6 standard size
(Standard: 9 pin, 15 pin, 25 pin; High Density: 15 pin, 26 pin,44 pin)
Combo-D / High Power in a variety of configurations:
(3W3, 5W5, 7W2, 9W4, 11W1, 13W3, 13W6, 17W2, 21W1, 21WA4)
Solder Cup, Vertical Mount & Right Angle Board Mount Options
High Reliability Screw machined contacts
3 amp / 5 amp / 20 amp / 40 amp Power Options
-65°C to +105°C Operating Temperature Range
Right Angle D-sub Connector IP66 IP67 Rated available in
3 industry sizes/positions:Standard Density (9 pin, 15 pin, 25 pin).
Male & Female Versions
Right Angle D-SUB Connector IP66 IP67 Materials
Shell: Steel with Nickel Plating.
Insulator: Glass-filled thermoplastic. U.L. rated 94V-O
(260° process temp for board applications)
Machined Contacts:
Male Pins - Brass
Plating: Gold Flash on entire contact.
IP67 Right Angle D-Sub Seal: Proprietary Information
Right Angle D-sub Connector IP66 IP67 Rated
Right Angle D-Sub IP67 Rated,Right Angle D-Sub Waterproof,Standard Density Waterproof Right Angle D-Sub Connector, High Density Waterproof Right Angle D-Sub Connector
ShenZhen Antenk Electronics Co,Ltd , https://www.antenk.com